Selection of foundation type of hospital building using analytical hierarchy process

Aswin Vincentius Hutahaean, Isdaryanto Iskandar

Abstract


In order to develop the Ministry of Defense Hospital dr. Suyoto in Bintaro, South Jakarta, a new 27-storey building will be built on the south side of the hospital complex. This study aims to select the type of foundation that is able to support the building above it, but with minimal disturbance due to vibration, noise, mud, and excavation, because the hospital must continue to operate, and relates to aspects of cost, time, and scope. The method used is the Analytical Hierarchy Process (AHP) involving five respondents who are considered construction experts from the Construction Center (Puskon) officers, planning consultants, supervisory consultants, and contractors. The results of the study found that concrete pile foundations with Hydraulic Static Pile Drivers (HSPD) were the most suitable for new building foundations from the five criteria and four alternative choices of foundations. In the detailed design process by the planning consultant, several pile caps were found that coincide with each other so it was decided to combine them into a large pile cap which also functions as a raft foundation. So that in its implementation, a combination of concrete piles with HSPD and raft foundations is used.


Keywords


Analytical Hierarchy Proces; Foundations; Hydraulic Static Pile Drivers

Full Text:

PDF

References


Abu, D. L. (2020). Tinjauan pelaksanaan produktivitas pemancangan dengan menggunakan metode diesel hammer.

Ammarapala, V., Chinda, T., Pongsayaporn, P., Ratanachot, W., Punthutaecha, K., & Janmonta, K. (2018). Cross-border shipment route selection utilizing analytic hierarchy process (AHP) method. Songklanakarin Journal of Science and Technology, 40(1), 31–37. https://doi.org/10.14456/sjst-psu.2018.3

Fitrianti, N. L. D., Ratnaningsih, A., & Soetjipto, J. W. (2014). Perbandingan efisiensi kerja alat diesel hammer dengan hydraulic hammer pada pekerjaan pondasi tiang pancang dari segi waktu dan biaya (Studi kasus : Proyek pembangunan Jember Sport Center). Artikel Ilmiah Hasil Penelitian Mahasiswa.

Geotechnical Engineering Consultant. (2022). Final report desain dan analisis geoteknik RS dr. Suyoto Jakarta Selatan approval No. 01/D 220040/21-01/ADM/PR (Issue July).

Hakim, A. R., & Akbar, A. (2018). Analisis produktivitas hydraulic static pile driver pada pembangunan apartemen Victoria Square Tower B Tangerang Banten. Jurnal Teknik Sipil, 25(2), 103. https://doi.org/10.5614/jts.2018.25.2.3

I Wayan Jawat, Putu Panji Tresna Gita, & I Made Satria Dharmayoga. (2020). Kajian metoda pelaksanaan pekerjaan pondasi bored pile pada tahap perencanaan pelaksanaan. PADURAKSA: Jurnal Teknik Sipil Universitas Warmadewa, 9(2), 126–142. https://doi.org/10.22225/pd.9.2.1830.126-142

Limanto, S. (2009). Analisis produktivitas pemancangan tiang pancang pada bangunan tinggi apartemen. Seminar Nasional 2009 Jurusan Teknik Sipil, FT-UKM, 15 Agustus 2009, 293–305.

Lutfiansyah, Y., & Akhsan, M. (2019). Comparative analysis method of work, time and cost of concrete spun pile work with bored pile on construction of the Light Rail Transit (LRT). Journal of Applied Science, Engineering, Technology, and Education, 1(1), 63–72. https://doi.org/10.35877/454ri.asci1137

Primaswari, G., Bhakti Utama, A., Taurano, G. A., Program, D., Teknologi, S., Jalan, K., Jembatan, D., Umum, P., Konstruksi, S. T., Gedung, B., Soedarto, J. H., & Semarang, S. T. (2022). Produktivitas hydraulic static pile driver pada proyek pembangunan workshop di Semarang. Orbith: Majalah Ilmiah Pengembangan …, 18(1), 11–21.

Puskon. (2021). Kerangka acuan kerja pembangunan rumah sakit dr. Suyoto Pusrehab Kemhan.

Puspita, D. A. (2016). Analisa produktivitas alat berat diesel hammer dan hydraulic hammer pada pemasangan pondasi tiang pancang di proyek pembangunan gedung 2 SMK 1 MUHAMMADIYAH Kepanjen Kabupaten Malang.

Saaty, T. L. (2008). Decision making with the analytic hierarchy process. Int. J. Services Sciences, 1(1), 83–98. https://doi.org/10.1108/JMTM-03-2014-0020

Saputra, R., & Edy, D. W. (2000). Analisis perkuatan daya dukung pondasi rakit (raft foundation) dengan geotekstil pada tanah lempung. Jurusan Teknik Sipil Faklltas Teknik Sipil Dan Perencanaan, Universitas Islam Indonesia.

Teknomo, K., Siswanto, H., & Yudhanto, S. A. (1999). Penggunaan metode analytic hierarchy process dalam menganalisa faktor-faktor yang mempengaruhi pemilihan moda ke kampus. Civil Engineering Dimension, 1(1), 31–39.

Wang, Q., Liu, S., Li, C., Yu, C., & Liu, Y. (2021). AHP based evaluation model of energy efficiency for energy internet. E3S Web of Conferences, 233. https://doi.org/10.1051/e3sconf/202123301031

Yuliana, C., Hapsari, R., & Dewi, E. P. (2021). Analisis perbandingan efisiensi alat pancang diesel hammer dan drop hammer pada pekerjaan pondasi tiang pancang di lahan (comparative analysis of efficiency of diesel hammer and drop hammer pieces on pile). Jurnal Infrastruktur, 7(2), 87–92.




DOI: http://dx.doi.org/10.24042/djm.v6i1.14796

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Desimal: Jurnal Matematika

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

  Creative Commons License
Desimal: Jurnal Matematika is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.