An Electronic Device Reviewed by Diagnosing on the Modules Embodiment

Arief Goeritno, Ika Setyawibawa

Abstract


An electronic device with various purposes needs in-depth study from the very beginning of the idea, before getting the final product. It relates to an essential role in providing user's infrastructure and service. The research objectives are to obtain the electronic circuits, modules, and devices by integrating the wiring. The research methods are conducted in the form of designing, manufacturing, assembling, and diagnosing. Designing stage is to obtain several electronic circuits as a liaison and the manufacturing stage to obtain the printed circuit board. The assembling stage is to obtain the gateway boards which controlled by the Arduino modules and diagnosing stage to obtain the interface device for communicating (IDC) is formed by integrating the wiring. Integrating several electronic circuits, modules, and devices have resulted in an IDC. Operating the IDC uses two different systems, i.e. from the telephony system to the radio-frequency system or vice versa with a half-duplex mechanism.

Keywords


electronic device, review on the relationship, diagnosing stage, module embodiment

Full Text:

PDF

References


M. Maemunah and M. Riasetiawan, "The Architecture of Device Communication in Internet of Things Using Inter-Integrated Circuit and Serial Peripheral Interface Method," 2018 4th International Conference on Science and Technology (ICST), 2018, pp. 1-4, doi: 10.1109/ICSTC.2018.8528663.

A. Goeritno, I. Setyawibawa, and D. Suhartono, “Simple Methods for Coverage Prediction of the Digital Trunking Radio Communication System”, INFOTEL, vol. 13, no. 4, Dec. 2021. doi: 10.20895/infotel.v13i4.674

R.K. Morrow, Telecommunications Network. Encyclopedia Britannica”, 2016. https://www.britannica.com/technology/telecommunications-network

M. Abiad, S. Kadry and S. Ionescu, "Cost efficiency of Telecommunication Equipment- A Review," 2018 4th International Conference on Applied and Theoretical Computing and Communication Technology (iCATccT), 2018, pp. 275-280, doi: 10.1109/iCATccT44854.2018.9001962.

J. T. J. Penttinen. “Introduction,” in The Telecommunications Handbook: Engineering Guidelines for Fixed, Mobile and Satellite Systems. Chichester, WS: John Wiley & Sons, Ltd., 2015, March 16, pp. 1-19.

R. S. E-T. Salim, and A. B. A. Mustafa, “Mobile Satellite Services and VSAT Technology: A Comparative Study,” IOSR J. of Electronics and Commun. Engineering (IOSR-JECE). vol. 16, no. 4, pp. 1-6, Jul-Aug. 2021. http://www.iosrjournals.org/iosr-jece/papers/Vol.%2016%20Issue%204/Ser-1/A1604010106.pdf

H. Yevhen. “Methods of Assessment and Diagnosis of the Quality of Knowledge in E-Learning,” J. of Commun. and Comp. vol. 12, no. 6, pp. 286-296. Dec. 2015 http://dx.doi.org/10.17265/1548-7709/2015.06.002

T. Mei, D. Xiang, and D. Mayer, “A crucial step for molecular-scale electronics: a stable and reversible single-molecule switch. National Science Review,” vol. 4, no. 5, pp. 666–667. Feb. 2017. https://dx.doi.org/10.1093/nsr/nwx017

A. Zemliak, “Analysis of strategies of circuit optimization on basis of maximum principle,” COMPEL-The Intern. J. for Comp. and Mathem. in electrical and electronic eng. vol. 37, no. 1, pp. 484-503, 2018. https://dx.doi.org/10.1108/compel-12-2016-0540

T. Aven, Improving the foundation and practice of reliability engineering. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability,” vol. 231, no. 3, pp. 295–305, Apr. 2017. https://journals.sagepub.com/doi/pdf/10.1177/1748006X17699478

T. Aven, “The reliability science: Its foundation and link to risk science and other sciences,” Reliability Eng. & Sys. Safety, 215, 2021. 107863. http://dx.doi.org/10.1016/j.ress.2021.107863

R. Brama, P. Tundo, A.D. Ducata, and A. Malvasi, “An Inter-device Communication Protocol for Modular Smart-Objects,” 2014 IEEE World Forum on Internet of Things (WF-IoT). Seoul, Korea, March 6-8, 2014. doi:10.1109/wf-iot.2014.6803203

G. Comina, A. Suska, and D. Filippini, “Towards autonomous lab-on-a-chip devices for cell phone biosensing,” Biosensors and Bioelectronics, 77, 1153–1167, 2016. doi:10.1016/j.bios.2015.10.092

D. Hindocha, A.K. Bagga, N. Atmande, and D.V. Rojatkar, “Next Generation Network: An Overview A Future Telecom Network. International Journal of Engineering Research & Technology (IJERT),” vol. 4, no. 3, pp. 675-680, 2015. http://dx.doi.org/10.17577/IJERTV4IS030913

D. M. Fitzpatrick, “Transient Analysis,” Analog Design and Simulation Using OrCAD Capture and PSpice, 2nd ed. Burlington, MA: Newnes, 2018, pp. 117–129. doi:10.1016/b978-0-08-102505-5.00007-0

M. Xia, H. Shao, D. Williams, S. Lu, L. Shu, and C.W. de Silva. (2021). Intelligent fault diagnosis of machinery using digital twin-assisted deep transfer learning. Reliability Eng. & Sys. Safety, vol. 215, 107938, 2021. Available: https://dx.doi.org/10.1016/j.ress.2021.107938

K. Kędzior, “Introduction to human factors and ergonomics” Int. J. of Occupational Safety and Ergonomics. vol. 24, no. 1, p. 1, 2018. http://dx.doi.org/10.1080/10803548.2018.1463724

G.-A., Capolino, J. A., Antonino-Daviu, and M. Riera-Guasp, “Modern Diagnostics Techniques for Electrical Machines, Power Electronics, and Drives. IEEE Transactions on Industrial Electronics, vol. 62, no. 3, 1738–1745, 2015. doi:10.1109/tie.2015.2391186

M. O. Sultonova, “Development of wireless telecommunication systems with the use of technologies of cognitive radio,” The 2016 International Conference on Information Science and Communications Technologies (ICISCT). Kuala Lumpur, 2016. http://dx.doi.org/10.1109/icisct.2016.7777394

A. Goeritno, I. Setyawibawa, and D. Suhartono, “Designing a Microcontroller-based Half-duplex Interface Device Drove by the Touch-tone Signal,” J. INFOTEL, vo. 13, no. 4, 2021. https://dx.doi.org/10.20895/infotel.v13i4.712

B. Massimo, and M. Shiloh, “The Arduino Paltform,” Getting Started with Arduino, 3rd edition. Sebastopol, CA: Maker Media, 2015, pp. 15-22.

A. Goeritno, J. Irawan, and Sopyandi, “Segmentation of Load Groups on a Single Phase kWH-meter Using the Payload Data Handling System,” Int. J. of Advanced Research,” vol. 6, no. 7, pp. 415-426, 2018. Available: http://dx.doi.org/10.21474/IJAR01/7378

A. Goeritno, and M.Y. Afandi, “Designing a Security System Based-on Microcontroller Integrated into the Immobilizer System. Int. J. of Electronics and Commun. Eng.,” vol. 6, no. 8, pp. 1-11, 2019. http://www.internationaljournalssrg.org/IJECE/2019/Volume6-Issue8/IJECE-V6I8P101.pdf

K. Sverian, J. Haule, and M. Kisangiri, “Review of Radio Propagation Properties and Applications in Different Frequency Bands. Int. J. of Eng. Research & Tech. (IJERT),” vol. 2, no. 11, pp. 307-312, 2013. https://www.ijert.org/research/review-of-radio-propagation-properties-and-applications-in-different-frequency-bands-IJERTV2IS110054.pdf

M. Scarpino, “Introducing EAGLE,” Designing Circuit Boards with EAGLE: Make High-Quality PCBs at Low Cost. New York City, NY: Pearson Education, 2014, pp. 1-5.

T. Page, “Touchscreen Mobile Devices and Older Adults: A Usability Study,” Int. J. of Human Factors and Ergonomics,” vol. 3, no. 1, pp. 65-85, 2014 http://dx.doi.org/10.1504/IJHFE.2014.062550




DOI: http://dx.doi.org/10.24042/ijecs.v1i2.10383

Refbacks

  • There are currently no refbacks.


Creative Commons License

International Journal of Electronics and Communications System (IJECS) is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.